串行配置设备(EPCS1,EPCS4 EPCS16 & EPCS64)数据表

The serial configuration devices provide the following features:■1-, 4-, 16-, and 64-Mbit flash memory devices that serially configureStratix® II FPGAs and the Cyclone™ series FPGAs using the activeserial (AS) configuration scheme■Easy-to-use four-pin interface■Low cost, low pin count and non-volatile memory■Low current during configuration and near-zero standby modecurrent■3.3-V operation■Available in 8-pin and 16-pin small outline integrated circuit (SOIC)package■Enables the Nios® processor to access unused flash memory throughAS memory interface■Re-programmable memory with more than 100,000 erase/programcycles■Write protection support for memory sectors using status registerbits■In-system programming support with SRunner software driver■Programming support with USB Blaster™ or ByteBlaster™ IIdownload cables■Additional programming support with the Altera® ProgrammingUnit (APU) and programming hardware from BP Microsystems,System General, and other vendors■Software design support with the Altera Quartus® II developmentsystem for Windows-based PCs as well as Sun SPARC station andHP 9000 Series 700/800■Delivered with the memory array erased (all the bits set to1)1Whenever the term “serial configuration device(s)” is used inthis document, it refers to Altera EPCS1, EPCS4, EPCS16, andEPCS64 devices
串行配置设备提供以下特点:■1 -,4 - 16 -,和64 -兆比特串行闪存设备configureStratix®II fpga和气旋™系列fpga使用activeserial■■易于使用的四线接口()配置方案低成本、低销数和非易失性内存■低电流在配置和接近于零的备用modecurrent■■3.3 - v操作可以有和16-pin小轮廓集成电路(SOIC)包■使nio®处理器访问内存未使用的闪存你接口■Re-programmable内存超过100000删除/ programcycles■写保护支持内存行业使用状态registerbits■设计细节支持与SRunner软件驱动程序■编程支持USB导火线™或ByteBlaster™IIdownload电缆■额外的编程支持与Altera®ProgrammingUnit(APU)和编程从英国石油(BP)微系统硬件,系统,和其他供应商■软件设计支持与阿尔特拉第四的®II developmentsystem基于windows的个人电脑以及Sun SPARC站andHP 9000系列700/800■交付与内存数组中删除(所有的位设置如出一辙)1只要“串行配置设备(s)”这个词在使用文档,它指Altera EPCS1,EPCS4,EPCS16 andEPCS64设备