先进的通用串行总线收发器

The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully
compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for
portable electronics devices such as mobile phones, digital still cameras, Personal
Digital Assistants (PDA) and Information Appliances (IA).
They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices
(PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical
layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage
regulator for direct powering via the USB supply VBUS.
The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB
host transceiver. They can transmit and receive serial data at both full-speed
(12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.
ISP1105 allows single/differential input modes selectable by a MODE input and it is
available in HBCC16 package. ISP1106 allows only differential input mode and is
available in both TSSOP16 and HBCC16 packages. ISP1107 allows only
single-ended input mode and is available in both TSSOP16 and HBCC16 packages
ISP1105/1106/1107范围的通用串行总线(USB)收发器完全
1.1符合通用串行总线规范启。他们是理想的
便携式电子设备,如手机、数码相机、个人
数字助理(PDA)和信息家电(IA)。
他们允许USB应用程序特定的集成电路(asic)和可编程逻辑器件
(器件)与电源电压1.65 V至1.65 V和物理接口
层的通用串行总线。他们有一个集成的5 V 3.3 V电压
监管机构直接驱动通过USB供应通风装置。
ISP1105/1106/1107范围可以作为USB设备收发器或USB
主机收发器。他们可以在全速传输和接收串行数据
(12 Mbit / s)和低速数据率(1.5 Mbit / s)。
ISP1105允许单/差分输入模式选择的模式输入和
在HBCC16包可用。ISP1106只允许微分输入模式和
可用TSSOP16和HBCC16包。ISP1107只允许
单端输入模式和TSSOP16和HBCC16可用包